Plan owner, DMT, and contractor: who does what in DMSMS

Blue Water Components · Updated November 2026

In DMSMS, the plan owner is accountable for the DMSMS Management Plan (DMP), and the DMSMS management team (DMT) does the work. DoDM 4245.15 has the program office form the DMT and "retain ultimate responsibility for all decisions" it makes; the DMT "develops and executes" the leadership-approved DMP. The contractor usually has a representative on the DMT and may write its own DMP under SAE-STD-0016A, which calls that author the "Plan owner."

This page is for DMSMS leads, program offices, and contractors who keep hearing three titles used as if they were one job. Quotations from DoDM 4245.15 and from SD-26 (June 2026) are marked. SD-26 is guidance. It binds a contractor only when the contract includes the language. For the shorter questions around notifications and cases, start with the DMSMS FAQ.

Plan owner, DMT, and contractor: the short version

Three names, three different jobs. The plan owner is accountable for the plan. The DMT does the work the plan describes. The contractor is usually in the room, and may also be the author of a separate plan of its own.

RoleWhat it is accountable for
Plan ownerOwns and approves the plan. On a government program that is the DMPO, usually the program office, whose leadership approves the DMP (DoDM 4245.15 §3.2.b(1)). In SAE-STD-0016A, the "Plan owner" is the organization writing its own DMP.
DMTThe cross-functional team that "develops and executes" the DMP, assigns actions, and shares their status (DoDM 4245.15 §3.2.b(1)–(2)).
Contractor"a prime or subcontractor representative, depending upon the terms of the contract, who serves as the interface between the DMPO and the contractor" (DoDM 4245.15 §3.2.b(3)(e)).

Where "plan owner" comes from

"Plan owner" is an SAE-STD-0016A term. It is not a role title in DoDM 4245.15, and the words "plan owner" do not appear in SD-22 (December 2025). The government office that approves the program's DMP is not the organization that writes a contractor DMP. They are not the same seat.

On a government program, leadership in the program office approves the DMP. The DMPO, usually that program office, keeps responsibility for the decisions the DMT makes. The phrase "plan owner" shows up when a contractor writes its own DMSMS Management Plan under SAE-STD-0016A. That author is the plan owner of that document. The contractor does not thereby own the government's DMP.

The contractor's two hats

The contractor shows up twice, and the two jobs should stay separate.

  1. A member of the DMT. SD-26 Requirement 6 has the contractor "attend DMSMS management team meetings to review open cases, the most recent DMSMS Health Assessment Report… metrics" (June 2026, p. 11). That is participation. It is not ownership of the government plan.
  2. Author of its own DMP. SD-26 Requirement 5 has the contractor "develop, maintain, and implement a DMSMS Management Plan in accordance with SAE-STD-0016A" (p. 10), delivered under DI-MGMT-81948B. SAE-STD-0016A calls that author the plan owner.

SD-26 is a contracting guide, not a mandate. Either requirement binds only when it is written into the contract. Read the RFP, the statement of work, and the CDRLs. The SD-26 (2026) explained page covers how program offices use that guide. Monitoring language, when it is in the contract, is SD-26 Requirement 12 predictive tools.

What SD-22 calls these jobs

SD-22 (December 2025), Section 3.2.1, "Roles and Responsibilities of DMT Members," is the guidebook's role list. It does not use "plan owner." It says "The PM is responsible for DMSMS management for the system." The DMT lead "is the spokesperson for the DMT who oversees and has the authority to control DMSMS management operations" and, as a best practice, "should be a full-time position." The program office representative "represents the views of the PM on the DMT. Normally, this person would be the DMT lead."

The contractor's seat, when the contract provides for it, is the prime or subcontractor representative. Section 3.2.1 says: "Assuming this representation is in the company's contract, the prime/subcontractor representative ensures that OEMs fulfill their roles and responsibilities with respect to DMSMS management as established by the statement of work (SOW)." That is not ownership of the government DMP. The PM assigns the relative roles with a RACI chart: one person is accountable for a decision, and others may be responsible, consulted, or informed.

What the DMT actually works

DoDM 4245.15 has the DMT develop and execute the leadership-approved DMP. The team assigns actions and shares the status of those actions. In practice that is case review, health reporting, and the decisions about which resolution to pursue. Who pays for the resolution is a contract question, not a role title. Who pays for DMSMS resolutions covers Requirements 22a, 22b, and 22c.

The data the team reviews often arrives as DI-MGMT-82274A deliverables: bills of materials, notifications, case data, and cost data. The DMT uses that record. It does not replace the program office's responsibility for the decisions.

A DMT with both government and contractor members is also what SD-26 describes as needed when a contract is prefunded for resolution work (p. 20). Membership on the team is not the same thing as accepting the cost. The contract still says who pays.

What not to mix up

  • The government DMPO approves the program DMP. The contractor's plan owner, under SAE-STD-0016A, authors the contractor's own DMP.
  • The DMT executes the plan. It does not take "ultimate responsibility" away from the program office. DoDM 4245.15 keeps that responsibility with the office that formed the team.
  • A contractor representative on the DMT is the interface the contract describes. That person does not own the government plan.
  • Opening a case, validating a notification, and choosing a resolution are DMT work only when the plan and the contract say so. The DMSMS FAQ covers notifications and when an out-of-stock part needs a case.

Free BOM check

Free BOM check: up to 100 line items, back in 2 business days. Send part numbers and manufacturers only, never quantities. Blue Water Components built SONAR AI to flag obsolescence, availability, and allocation risk on each line.

How the free BOM check works

Frequently asked questions

In DMSMS, what is the difference between the plan owner, the DMT, and the contractor?

In DMSMS, the plan owner is accountable for the DMSMS Management Plan (DMP), and the DMSMS management team (DMT) does the work. DoDM 4245.15 has the program office form the DMT and "retain ultimate responsibility for all decisions" it makes; the DMT "develops and executes" the leadership-approved DMP. The contractor usually has a representative on the DMT and may write its own DMP under SAE-STD-0016A, which calls that author the "Plan owner."

Related reading

  • DMSMS FAQ: notifications, cases, and out-of-stock parts
  • SD-26 (2026) explained
  • DMSMS design health in source selection
  • Who pays for DMSMS resolutions
  • DI-MGMT-82274A explained
  • Free BOM check

Sources

  • DoDM 4245.15, Management of Diminishing Manufacturing Sources and Material Shortages (26 October 2022), §3.2.b and the glossary (DMPO)
  • SD-26, DMSMS and PM&P Management Contracting Guide (June 2026), Requirements 5 and 6, DLA ASSIST
  • SD-22, DMSMS Guidebook (December 2025), Section 3.2.1, DLA ASSIST
  • SAE-STD-0016A abstract. The full standard is paywalled; this page uses only the "Plan owner" term as cited by SD-26.

Not legal or contracting advice; your contract governs. SD-26 is guidance, not a mandate. Blue Water Components is not affiliated with or endorsed by DSPO, SAE, or the Department of Defense.

Something went wrong. Please reload the page. Reload 🗙